Mabis DMI Deluxe Heavy-Duty Over Bed Tilt-Top Table
Mabis DMI Deluxe Heavy-Duty Over Bed Tilt-Top Table

Mabis DMI Deluxe Heavy-Duty Over Bed Tilt-Top Table

Brand/Manufacturer: MABIS DMI HEALTHCARE
Save
Authorized Retailer Badge

This product is on backorder and will be available to purchase once it is back in stock.

Mabis DMI Deluxe Heavy-Duty Over Bed Tilt-Top Table makes eating, reading or writing easy while in bed. It has a laminate top with chrome plated steel column and base. It tilts in either direction, forward or backward.

Features

  • Mabis DMI Deluxe Heavy-Duty Over Bed Tilt-Top Table is easy to assemble
  • Table top adjusts from: 25-3/4" to 39"
  • Height adjusts from: 34" to 46"
  • Table top: 15" x 30"
  • 2" hooded ball-bearing locking casters

More Information

  • Assembly Instructions

    Mabis DMI Deluxe Heavy-Duty Over Bed Tilt-Top Table1. Place the woodgrain table top (A) on the floor with the chrome bracket side facing up.
    2. Loosen the tilt adjustment knob (E) from the adjustment rod (C) and remove nut.
    3. Insert threaded end of the adjustment rod (C) into the tubing section of the upright support. Align the corresponding angles of the tubing.
    4. Insert the tubing section of the upright support into the tabletop bracket (B). Position the 3/16" nut on the end of the adjustment rod (C), ensuring that the smaller section of the nut is inserted into the tubing. Screw the tilt adjustment knob (E) onto the threaded end of the adjustment rod (C) until tight.
    5. Insert height adjustment lever (F) into the opening above the table bracket. Make sure that the lever is positioned with the flat side up.
    6. Align height adjustment lever (F) with the holes on either side of the upright support (H). Insert the 2" bolt (G) through both sides of the frame and the holes in the lever. Position the 3/16" nut on the end of the bolt and tighten using a 7/16" socket wrench and a 3/16" wrench.
    7. Position the H-shaped base (K) on top of the upright support with the four caster holes facing up.
    8. Align the holes in the frame of the H-shaped base (K) with the holes at the top of the upright support. Insert the 2" bolts (I) and washers (J) and fasten securely using a 14 mm socket wrench.
    9. Firmly insert the four casters (L) into the four holes on the H-shaped base (K).
    10. Turn the table over onto the casters. Check to make sure the tabletop is secure. Using a Phillips head screwdriver, loosen without removing the screw that is located in the square black cap on the upright support. The table is now ready for use.

  • To Adjust Table Height:
    - Lift up on the black height adjustment lever
    - Pull up on the tabletop to raise the table height
    - Press down on the tabletop to lower the table height
    - Release the lever when the table is positioned at the desired height

  • To Adjust Tilt:
    - Loosen the black tilt adjustment knob
    - Tilt table top to desired angle
    - Tighten tilt adjustment knob to secure tabletop position

  • Caution:
    - When storing, lower the tabletop to the lowest height possible
    - If desired, tilt the tabletop until vertical, to fit into small spaces
    - Tighten the tilt adjustment knob to prevent tabletop movement while stored

Customer Reviews

Questions & Answers


 
 
question image
What are dimensions of table top. And will it go over a wheelchair
Maggie - 7/19/2016 2:26:54 PM
answer image
Thank you for contacting customer care service.
This item will not be ideal for a wheelchair, due to the base of the unit. Seems it will be in the way. 
 Dimensions are given in Features on product page.
Customer Care - 7/21/2016 12:21:16 AM
question image

How much weight will the table top hold


Penny - 3/24/2015 3:35:19 PM
answer image
Thank you for reaching out to us. It can hold approx 20lbs.
Customer Care - 3/26/2015 2:41:15 AM
Please enter your and your friends email address below.
Fields marked with * are compulsory
 
*
*
*
*

 

Submit Cancel
The selected product information has been successfully emailed to your friend.

Thank you for using www.damozelle.com

Close