Adjustable Angle Sequencer with Switch for Visually Impaired

Adjustable Angle Sequencer with Switch for Visually Impaired

Brand/Manufacturer: ENABLING DEVICES
Hpfy stores Save

Adjustable Angle Sequencer with Switch for Visually Impaired has circular patterned red LED lights in the center which give the user a visual cue for targeting and encourage the user to activate the switch. The angle of the big five inch switch is adjustable from 32 degrees to 90 degrees. The light can be turned on or off. This sequencer has a total of 300 seconds recording time and can be clamped.


  • Adjustable Angle Sequencer with Switch for Visually Impaired has bright lights
  • Also works as a switch
  • Requires 4 AA batteries (not included)

More Information

  • Operation:
    - Adjustable Angled switch communicator requires 4AA batteries
    - Use alkaline batteries only (e.g. Duracell or Energizer brand)
    - Do not use rechargeable batteries or any other type of batteries because they supply lower voltage and the unit will not perform properly
    - Never mix old and new batteries together or different brands or types together
    - Gently turn the unit over to reveal the black battery compartments
    - Carefully remove the small screws from each battery compartment cover using a Phillips head screwdriver, and slide the covers off
    - Observing proper (+) and (-) battery polarity
    - There are 2 controls between the battery compartments; 1 is an ON/OFF switch for the LED lights on the front of the switch
    - When turned ON, the LED lights will stay ON until this switch is turned OFF
    - Messages can vary in length and the total record time is 300 seconds
    - To play the messages, flip the RECORD/PLAY switch to the PLAY position
    - Activation of the Yellow switch plate will play the first message; the second activation will play the second message, and so on
    - To interrupt the messages and start at the beginning of the sequence, press the RESET button on the back of the unit
    - The unit will retain recorded information indefinitely, even if the battery is disconnected
    - Previously stored information will be erased only when new recording is performed
    Note: When re-recording messages, all messages on the unit will be erased
    - To turn the unit off, turn the volume control knob counter-clockwise until you hear an audible click
    - The Adjustable Angled switch can be adjusted from 20 to 90 degrees by simply losing the two knobs on the side of the unit and pulling up the big 5" Yellow Plate to the desired angle
    - Once you have the desired angle simply tighten the two set knobs to lock in the angle
    - Do not over tighten the set knobs
    - Finger tight is all that is needed
    - All it takes is a slight push on the plate, a roll up action by your hand or a swiping action to activate the switch
    - There are also three different spots on the black base mold to clamp the switch to a table top or wheelchair tray
    - To use the switch, attach one end of the double ended 1/8" to 1/8" male cord (included) into the back of the Adjustable Angled switch, via the 1/8" jack
    - Next plug the other end of the cord into your adapted toy or device
    - Make sure all connections or tight with no gaps
    - When the yellow Plate is pressed the toy or device will activate
    - Release the plate and your toy/device will turn off
  • Care of Unit:
    - The Adjustable Angled switch can be wiped clean with any household multi-purpose cleaner and disinfectant
    - We recommend Simple Green, which is a non toxic biodegradable all-purpose cleaner
    - Do not submerge the unit, as it will damage the contents and the electrical components
    - Do not use abrasive cleaners, as they will scratch the surface of the unit

Customer Reviews

Please enter your and your friends email address below.
Fields marked with * are compulsory

Submit Cancel
The selected product information has been successfully emailed to your friend.

Thank you for using