Medline EntraFlo Nutrition Delivery System

Name: Medline EntraFlo Nutrition Delivery System
Brand: MEDLINE INDUSTRIES
SKU: 21285
Price: 1384.99 USD
Availability: InStock

Brand/Manufacturer: MEDLINE INDUSTRIES

Prescription required
Latex Free

Medline EntraFlo Nutrition Delivery System makes tube feeding easy for patients. It's easy to set up and adjust. Nurses can see the infusion rate and volume on the dual display. It stops automatically when the dose is done. It remembers important info and has an 8-hour battery that recharges while it works.

Why Choose Medline EntraFlo Nutrition Delivery System

Enhance care with personalized feeding and hydration
Auto-prime feature for seamless formula and water delivery
Store flow rate, dose limit, formula strength, and more for easy tracking
Security doors prevent accidental disconnection
8-hour battery life at 100 mL/hr, rechargeable during operation

Particulars	Specifications
Flow Infusion Rate	1 to 295 mL/hr in 1 mL increments
Dose Limit	0 to 9995 mL in 5 mL increments
Accuracy	10% of the selected flow rate
Occlusion Pressure	Does not exceed 15 p.s.i.
Expected Battery Life	2 years (200 full charges)
Expected Life of Device	5 years
Mode of Operation	Continuous
Operating Temperature	5°C to 40°C (41°F to 104°F) 95% R.H. non-condensing
Storage Temperature	0°C to 50°C (32°F to 122°F) 10% - 95% R.H. non-condensing
Sound Pressure Level	Does not exceed 70dB(A)
Degree Of Protection Against Electrical Shock	TYPE BF (Administration Sets are nonconductive)
Operating Barometric Pressure	700 hPa (10.2 p.s.i.) - 1060 hPa (15.4 p.s.i). Pump components are not affected by pressure conditions.
Case Material	Fire Resistant Plastic
Power Requirement	120V, 187mA, 60Hz
Weight	5.7lb

Item #	Desc	Pkg	Price	Cart
ENT199235	7.4" High x 9.5" Wide x 5.3" Deep	Each	$1523.45 $1384.99

Medline EntraFlo Nutrition Delivery System Features

Ease of Use

Versatility

Rate adjustable in 1 mL/hr increments from 1 to 295. Dose adjustable in 5 mL increments from 0 - 9995.

Lightweight and Portable

An internal backup battery can provide power for short-term use. While the pump should normally be operated on AC outlet power, the internal backup battery can provide operation for up to 8 hours at 100 mL/hr if necessary.

Ease of Maintenance

The fire resistant plastic case and sealed control panel helps prevent fluid leakage and allow cleaning with any mild soap.

Alarms

Low Battery, Battery On, Dose Complete, and Occlusion/Empty for detecting empty container or occluded line.
2 ½ minute Pause Alarm

Low Occlusion Pressure

15 p.s.i. occlusion allows for safe use with any enteral feeding tube.
Built-in Pole Clamp
Total Volume Delivered Display
Accumulated Volume Display*
Adjustable Alarm Volume

Dose Limit for Intermittent Feedings

With 3 selectable alarm modes.*
Memory Retention of Infusion Rate, Dose
Limit, Volume Delivered and Accumulated Volume even after unit is turned off. Settings are automatically recalled when the pump is turned back on.

Serviceability

Self-diagnostic mode allows for complete
circuitry check with the push of two buttons.

*with serial numbers greater than 400000

Caution for Pump Use:

This pump is only for feeding tubes, not for putting medicine directly into veins.
Don't change anything in the pump because it could make it not work right or be unsafe.
Watch out for your fingers when the pump is running.
Make sure nothing is blocking the plug and outlet where you connect the pump.
If you need to unplug the pump, pull it out of the wall.
Stay close enough to see the numbers and hear any alarms.
Keep your cellphone or other wireless devices at least 4 inches away from the pump.
Don't use the pump where there's a lot of dust or bright light.
When you're done with the pump, follow the rules for getting rid of it in your healthcare place.
Only use this pump with the special tubes it's made for. Using other tubes could be risky for the patient.

Frequently Bought Together

How to Clean Medline EntraFlo Nutrition

Always unplug the pump before cleaning to avoid getting shocked.
Use a cloth or sponge and warm soapy water for regular cleaning.
Don't use strong cleaners or alcohol a lot because it might harm the pump.
Wipe down the outside of the pump and the rollers with the soapy water.
Use cotton swabs with isopropyl alcohol to clean the drip sensors.
Remember, safety comes first, so make sure the pump is unplugged before you start cleaning.

Specification

Particulars	Specifications
Flow Infusion Rate	1 to 295 mL/hr in 1 mL increments
Dose Limit	0 to 9995 mL in 5 mL increments
Accuracy	Â±10% of selected flow rate
Occlusion Pressure	Does not exceed 15 p.s.i.
Expected Battery Life	2 years (200 full charges)
Expected Life of Device	5 years
Mode of Operation	Continuous
Operating Temperature	5Â°C to 40Â°C (41Â°F to 104Â°F) 95% R.H. non-condensing
Storage Temperature	0Â°C to 50Â°C (32Â°F to 122Â°F) 10% - 95% R.H. non-condensing
Sound Pressure Level	Does not exceed 70dB(A)
Degree Of Protection Against Electrical Shock	TYPE BF (Administration Sets are nonconductive)
Operating Barometric Pressure	700 hPa (10.2 p.s.i.) - 1060 hPa (15.4 p.s.i). Pump components are not affected by pressure conditions.
CaseÂ Material	Fire Resistant Plastic
Power Requirement	120V ~, 187mA, 60Hz
Weight	5.7lb

Customer Reviews

Please enter your and your friends email address below.

Fields marked with * are compulsory


Your Name: *	Error msg
Your Email Address: *	Error msg
Friend's Name: *	Error msg
Friend's Email Address: *	Error msg
Message:
Captcha:	Hcaptcha Gcaptcha
	Submit Cancel