Medela LactinaDouble Breastpump Kit

More Information

• Intended Use:
  The Lactina Breastpump is a powered breastpump:
  - To be used by lactating women to express and collect milk from their breast.
  - To initiate and maintain a milk supply as well as collect breastmilk at work or during other absences from the baby.
  - To initiate and maintain a milk supply if direct breastfeeding is not possible.
  - To relieve engorgement.
  - For use in a hospital or home.
• Important:
  - Plastic bottles and component parts become brittle when frozen andmay break when dropped.
  - Bottles and component parts may become damaged if mishandled,e.g. dropped, over-tightened, or knocked over.
  - Take appropriate care in handling bottles and components.
  - Do not use the breastmilk if bottles or components become damaged.
• Wash 
  - Before first use and after each use:
  - Separate parts for washing.
  - Rinse all separated parts that came in contact with breast and breastmilk in cool water in order to remove breastmilk residue.
  - Wash in sink:
  - Soak all separated parts in warm soapy water for 5 minutes.
  - Wash each part with a clean dishcloth or soft brush.
  - Rinse all separated parts with clear water.
  - Wash in dishwasher:
  - Wash all separated parts on top rack of dishwasher.
  - Allow all breastpump parts to air dry in a clean area.
  - Store dry parts in a clean, cool place when not in use.
  - Place parts on a clean surface and/or towel.
  - Allow all parts to air dry.
  - Store dry parts in a clean, cool place when not in use. Do NOT store wet or damp parts.
• Cylinder/Piston Care:
  - Care for your piston and cylinder after every few pumping sessions with the Lactina breastpump or manual breastpump.
  - Wash the cylinder, seal, and vacuum regulator ring with warm soapy water.
  - Rotate the piston in the cylinder.
  - If your piston/cylinder comes in contact with breastmilk remove and wash with breastpump kit.
  - Do not use Quick Clean MicroSteam bag to sanitize the piston and cylinder.
• Sanitize
  -  Before first use and once per day
  - Separate all parts that come in contact with breastmilk.
  - Wash hands thoroughly.
  - Fill a pot with enough water to cover all parts.
  - Bring water to a boil.
  - Place parts in boiling water for 10 minutes.
  - Allow water to cool and gently remove parts from water with tongs.
  - Place parts on a clean surface and/or towel.
  - Allow all parts to air dry.
  - Store dry parts in a clean, cool place when not in use. Do NOT store wet or damp parts.
• Tubing Care:
  - Turn off breastpump.
  - Unplug breastpump from power source.
  - Remove tubing from port on pump connector.
  - Remove tubing from breastshield.
  - Rinse tubing in cool water to remove breastmilk.
  - Wash tubing in warm soapy water.
  - Rinse tubing with clear water.
  - Hang to air dry or shake out any drops of water from the tubing and let the pump run with tubing attached for 1-2 minutes until dry.

Customer Reviews